I left Maine with a plan. I had already corresponded with Dr. Wolfgang Feist (founder of the Passivhaus Instiut) and Katrin Klingenberg (head of PHIUS, Passive House Institute U.S.) and asked if I might be able to interview them for Green Building Advisor and the Green Architects’ Lounge. Both had indicated a willingness to do so, but the schedule for the event at the Boston Architectural College on October 23 was pretty full and they really didn’t know if there would be time.So I had decided that after joining up with Martin Holladay for the small group conversation prior to symposium, I’d try to steal some time between the meeting and the symposium. Failing that, I would attempt to pull them aside afterward for a quiet interview or even better, take them out for a drink and record a short interview on location.As you can imagine, there was a shortage of spare time to steal away during the event. So I was thrilled when I was included in the small party of six for dinner afterward. Our mission was to find a nice quiet place to dine, drink, chat and record an interview.It turns out there’s no such place on Newbury St. in Boston. So, an audio recording of the dinner interview exists, but I’m afraid the background noise is too distracting and makes for an annoying aural experience (unless you really enjoy the chiming of flatware, background music, background conversations from neighboring tables, and the loudest fajita ever ordered). Perhaps if we find an audio editing genius, who enjoys donating their free time, the Green Architect’s Lounge will release it as a bonus later. Until then, the transcript will have to do.Engaging and delightfulIt was a beautiful autumn evening. We walked a few blocks to our restaurant, chatting about some of the evening’s events and how the Boston Architectural College building might be perfect for a deep-energy retrofit (possibly Passivhaus?). In attendance were Dr. Wolfgang Feist; Katrin Klingenberg; Declan Keefe of Placetailor; John B. Clancy (or “J.B.”) of Albert, Righter & Tittmann Architects; Mark Anstey of J.P Design; and myself.I found all to be most engaging and delightful, Dr. Feist in particular. After hours of discussion on the topic (and being seven hours ahead of all of us) he was still just as kind and eager to talk about Passivhaus as though his day was just beginning. In fact I thank them all for participating and ignoring the microphone on the table as we happily talked about politics (omitted, for obvious reasons), architecture, and some finer details of the Passive House system.If you are new to the Passive House concept, I urge you to visit a few of the links on this page prior to continuing. It will help you quite a bit, as this conversation does not cover the basics (like, “What is a Passive House?”).A toast, to my dinner guests and you, fine reader. Varying climatesBriley: Using the same study that you used to come up with these [passive house] standards, could you theoretically do that same study for our six different climate zones and come up with six different sets of standards?Dr. Feist: You may be surprised; this has already been done.Briley: I am surprised! … and I see Katrin is smiling like crazy.Dr. Feist: It’s not yet published, but we have a project financed by the German Environmental Foundation, and they asked us to do these studies in six different climate zones worldwide.Briley: Worldwide?Dr. Feist: Yes, including China, but not tropical climates. … Siberia, Dubai (one of the toughest climates in the world).Briley: Right, and the buildings probably have to be all glass…Dr. Feist: …Ha, they now even have a big hall where they can go skiing in the middle of the desert. But seriously, it is a really tough climate. It also turns out that the main [Passivhaus] principels can be used everywhere. There are only a few climates — like Lisboa in Portugal — where the conditions are so good that you don’t need any heating or cooling anyway, so you don’t really have to do a lot to meet the standard.Klingenberg: Like San Diego.Dr. Feist: And then there are parts, say, in Antarctica, where it is extremely tough to do anything.Briley: Did you develop a standard for Antarctica?Dr. Feist: No, we did not. Though there were some crazy guys in Belgium who have already built a Passivhaus polar research station. It’s already there. But I don’t care about this climate. It’s kind of like northern Sweden; if you say you can’t build a Passivhaus there, well, then I could live with that.The PHPP spreadsheet and thermal massBriley: So Dr. Feist, there must have been a moment long ago where you said, “I know what I’ll do: I’ll open up an Excel spreadsheet, and I’ll work out these formulas.” Is that how it went down?Dr. Feist: No, it was completely different. When we started the first project, there was nothing like that, so we had to use simulation software where we simulated every nail to get the right values, and it didn’t turn out so well. It’s interesting. There was another American involved in that. It was Amory Lovins [of the Rocky Mountain Institute]. I showed him the simulations and the measurement, and after an hour of conversation he said, “Well, Wolfgang, you are completely wrong.” [Laughter around the table.]I was completely shocked. My belief was that the first Passivhaus project was just a research project. He said, “No, you are wrong. This is not a research project – this is the solution.” And he also told us, “You have to simplify and create a tool that is easy to handle.”So that is the point where we started to think about how to simplify the concept and how we arrived at these simple three standards, on the one hand, and on the other, to see if we could reduce the complexity of the simulation to focus on the real important parts. Of course, thermal mass is also important, to have that in the simulation makes it much more complicated. If you want to include thermal mass, you can’t be satisfied with just the envelope, you have to use the whole structure, and that makes it much more complicated to bring these data all into the program. So we decided to simplify it to a simple almost envelope-only system.Briley: So does the Passive House Planning Package take thermal mass into account at all?Dr. Feist: It does, but you estimate the thermal mass, by looking at how many areas are filled with masonry or timber, and you account for those and calculate a good guess, for thermal mass. Because the influence of thermal mass isn’t so high – this is still good enough compared with the accuracy of other inputs.The PHPP: Passive House Planning PackageBriley: Do you think there’s going to be any development in the PHPP software? Right now it’s a spreadsheet, a very elaborate spreadsheet. I’m just now getting my feet wet and starting to use it myself. I started off thinking “Ah, Excel! I can do this.”Dr. Feist: It’s easy, no? That’s the reason we did it this way. Well, there are two reasons: one is that anyone can use it, and the second is that it’s open. You can see every algorithm which I think is important. It’s also easy if you want to add something. There have been other discussions about having other programs besides the spreadsheet, but I think we will always keep the spreadsheet.Briley: Are you prepared to see other people run away with the spreadsheet and adding on other complex things?Klingenberg: Good luck with that. [Chuckles around the table.]Dr. Feist: I think we should never stop thinking about development. I like to have feedback and it’s good to give that feedback back to the community. That’s why we’ve started Passipedia, because it’s very important to share knowledge. [Dr.Feist was referring to their new Web site, www.passipedia.com, that acts as a warehouse for user knowledge on all subjects relating to the Passivhaus standard.]Anstey: There’s a gentleman who spoke up at the meeting today who mentioned that he worked on AutoCad, and I was wondering if someone has tied together a CAD system and the PHPP spreadsheet.Keefe: Revit would be great for this.Dr. Feist: Have you heard of SketchUp? There’s already a draft that uses SketchUp to input the geometric data into the spreadsheet because inputting the basic data into the cells is fun, but dealing with all of the geometric data is tough work.Klingenberg: So it’s like you put the information on both of them…?Dr. Feist: You make a sketch, then you hit the button and you get your areas and volumes for PHPP.Klingenberg: Do you know when this is going to be available?Dr. Feist: There’s already a draft, so maybe we’ll try to get it in the next draft of the PHPP. Or maybe we’ll create a separate tool. I think that would be very interesting for architects.Briley: It would! Because it’s hard to input the information if it’s not a rectangle, or a box.Dr. Feist: The other thing is you get to change and choose components. Because that’s lots of fun, isn’t it?Briley: Oh yeah, lots of fun [light sarcasm]. I do that in my spare time when I’m not doing stuff like this.Keefe: One of the guys I work with is working on the same thing for Revit, where there’s a file within Revit that has all the geometric data. We’re trying to get from Revit into PHPP.Klingenberg: There’s another person in Chicago that’s already done it. It’s probably something we should really talk about, because there are some other platforms, some other design tools… I think Laura will show you some of her design students have built a platform through Grasshopper that connects the Rhino software with PHPP. It’s pretty cool, they can pull a corner of the building and it updates the data automatically.Dr. Feist: That’s good! Even as a tool for teaching!Klingenberg: Yeah, it’s perfect. And for designers! Designers don’t want to deal with numbers. So they just pull on the corner of their building and…Dr. Feist: …and it gives you a feeling of what they are doing. Cool.Anstey: And for shading. Like Fred’s building where there are a lot of different shading conditions for all the different windows. SketchUp models shading. It tells you at any time whether the window is fully shaded or partially shaded… If we had to input that, sort of analog, then it would take us forever. Not that we need to get to that level of precision, but it would be really great to let SketchUp tell the model, “That window is 45% shaded, this window is 22% shaded” — because it changes so much.Dr. Feist: You know there are sheets for shading. And as it turns out, this is really important, much more than people think. That’s one of the reasons why some of the old passive solar concepts didn’t work, because they very often didn’t look at shading.Well, that’s interesting that you had the same opinion on this [development of the software] because that’s very high on our list.Passivhaus commercial buildingsBriley: So Katrin, you mentioned that you were dabbling with the idea of coming out with a passive house standard for commercial or institutional building types?Klingenberg: We’re not developing a new standard; it’s basically the same standard. We’re going by the same certification. But there are a lot of inquiries we’re getting right now, especially from governments. We really want to do this for commercial buildings, for our governmental buildings, and for our schools and for retrofits.Dr. Feist: We’ve done research on offices and schools and so on, and I think this is not so different in Europe as in the U.S. But they do have different boundary conditions than residential buildings (these schools and offices), so the calculation process has changed a little bit, so we definitely know how to do this. The interesting thing is that if you change the purpose of a building then the criteria will change.Briley: It WILL change?Dr. Feist: It will change. For swimming pools, for example. They normally have incredibly high [energy] consumption — like ten times that of an ordinary building.Briley: And hospitals…Dr. Feist: Yes, hospitals. That might be next. What we have learned is that we can’t do that from a theoretical point of view. You have to work through all of these calculations and then come up with a recommendation.Briley: You mean like one number for energy consumption?Dr. Feist: Maybe three or four. But you can come up with a performance standard that will be different from a dwelling.Klingenberg: We’re getting busy implementing the first schools, and maybe by the time we’re ready for the hospitals, you guys [to Fiest] will have it all worked out [with a laugh].Dr. Feist: [With a laugh, to Katrin] Keep away from hospitals for the moment.Heating, cooling, AND primary energy useJ.B. If a building is below the total energy demand standard but is somehow not able to meet the heating demand, is that a bad building?Dr. Feist: No, It’s not a bad building, but it’s not a Passivhaus. You could be using an expensive heating system, and that’s the problem. The heating requirement, 4,755 Btu per square foot… if you start changing that number, then soon you start changing other numbers, and where do you stop? That’s the first reason. The second is, we want to have an incentive for the development of better components. I think that’s a good idea to have.J.B. I’m in complete agreement in holding the line. I guess I was wondering if one line needs to be held, do both lines need to be held, since the primary energy consumption includes the heating demand?Dr. Feist: To be honest on that, I really think that the heating demand and cooling demand is more important, because that represents the structure of the building. The thing that would last for a hundred years…J.B. Because [in the future] you could always change to more efficient light bulbs…Dr. Feist: …And the systems could change several times over the life of the building, and the amount of the primary energy depends on the supply system. So we put in the primary number because what we don’t want is an efficient Passivhaus that then uses electric resistance heating.Briley: That makes it clear, because there are a lot of people out there who think the primary energy standard should be the only standard.Dr. Feist: I don’t agree with that. We had that in Germany. In Germany the code is on primary energy. That has a lot of difficulty. For example if you have a poorly insulated building and you heat it with wood chips, it will get a good number, but this is not a solution that everybody can do. The other question to address with the primary energy, is how to account for cogeneration.Briley: So you keep the heating and cooling load in there because it directly relates to the building, whereas the primary energy is really focused on the energy coming into the building — which over time could be a variable.Integrating Passivhaus and LEEDBriley: There seems to be this misconception out there that it’s Passivhaus versus LEED — that you have to pick one or the other. Isn’t that a false choice?Klingenberg: Definitely false.Anstey: They seem ripe for synergy.Briley: It’s like LEED covers this huge spectrum of “green,” while Passivhaus is focused on just energy.J.B. It’s how they [LEED] cover it. What they cover is fine, but if they’d give you values that are quantifiable and not just a point…Briley: Right, it’s binary. Point, or no point.Anstey: It’s like in the earlier versions of LEED when they give you a point for a bike rack…Briley: I’ve gotten that point before!Anstey: …So, I think they have a learning curve, and that’s fine.Briley: Yeah, like with LEED for Homes, we complain because in Maine we’re a water-rich state. And there are a lot of points I can get for an awesome irrigation system that I don’t need.J.B. You could not irrigate at all.Anstey: That’s one point.J.B. [laughing] But if you do irrigate you can get 10!Briley: [To Katrin] Well, it’s very nice to hear that you guys are chatting [LEED and Passivhaus].Klingenberg: It’s a very fine line. I can’t say much more about it. We’re also talking to Sam Rashkin at the Energy Star department, which is doing better.Briley: Can you at least give us an impression on how it’s going with the LEED folks?Klingenberg: I think it’s going really well. I think I expressed that today at the symposium. It’s amazing. There’s an awakening that is happening that would have been unimaginable a year ago.Is there a size bias?Briley: Katrin, you mentioned that the compactness of a building relates to the efficiency of a building, which we all conceptually understand. But when you’re sizing standards by the square foot, is there an advantage given to larger buildings?Dr. Feist: Yes, there is, but with respect to usable area… We only count the usable area, we don’t count the ‘brute’ area because that might create wasteful space and that’s what we don’t want. So we only count usable spaces, and this gives us the right relation. So it makes bigger buildings less expensive than the smaller ones, and I agree with that.Briley: You mean to make buildings more compact, not necessarily bigger.Dr. Feist: If you do just a single-family home, that is not true, because if you make it bigger it will just make the home more expensive and you’re not going to just make something bigger to get better square foot numbers. That won’t happen.What we’ve already defined, but it’s not yet published, is something for smaller buildings. I think if you have a smaller amount of area per person, we don’t want to punish that. So you will be able to choose a per area value or a per person value. I think we should not bring up these social discussions of limiting the size of homes, especially in America.Briley: Because it’s easy to make someone shut down and say, “Well, then I’m not interested, because I want my space.”Feist: Yeah.Anstey: You also don’t know what a house is going to be used for in 20 years time. Because there are plenty of examples of huge mansions that are now multi-unit condos. If you did the PHPP on them 100 years ago, they’d be massive, but now you’ve got 40 people in them. As it’s all about the envelope…Dr. Feist: [Very pleased] That’s the argument to be used!J.B. And what we found interesting today is we heard that Passivhaus is easier with multi-unit buildings. Well, 1) I don’t think that’s true, and 2) obviously with a larger building with a better envelope-to-volume ratio, yes it is easier. But, that should be an incentive to build multi-unit buildings. It would be really difficult to do it as a single-family detached, but if you get a benefit for joining walls and floors and ceilings then…Dr. Feist: This is pushing us in this direction. We had the same thing. I had a very serious discussion with the German government. Why not have the same requirement for ALL buildings, say 40 kwh per square meter, because that would be tougher for single-family homes than for multi-unit buildings. RELATED ARTICLESA Conversation with Dr. FeistPassivhaus For BeginnersPassivhaus Crosses the AtlanticEquipment Versus EnvelopeSimplicity Versus Complexity Passivhaus Windows A ‘Magic Box’ For Your PassivhausWindows That Perform Better Than WallsChoosing Triple-Glazed WindowsHeating a Tight, Well-Insulated HouseForgotten Pioneers of Energy EfficiencyThe History of the Chainsaw RetrofitCan Foam Insulation Be Too Thick?Pro/Con: Does Passivhaus Make Sense Over Here?In Defense of the Passive House StandardComparing Passivhaus Standard Homes to Other Low-Energy Homes
An additional $20.5 million is earmarked to continue work in the new fiscal year by the Meteorological Service of Jamaica, to develop a comprehensive Bush Fire Warning Index and Management System. An additional $20.5 million is earmarked to continue work in the new fiscal year by the Meteorological Service of Jamaica, to develop a comprehensive Bush Fire Warning Index and Management System.The allocation is contained in the 2019/20 Estimates of Expenditure, now before the House of Representatives.The project, which commenced in April 2017 and is being financed by the Caribbean Development Bank (CBD), aims to enhance Jamaica’s resilience to bush fire hazards in order to reduce the negative impact on economic activities and livelihoods, as well as infrastructure and human welfare and life.It is envisaged that this will result from improved monitoring and predictions of critical bush fire outbreaks, and increased public awareness of these hazards.Achievements, up to December 2018, include: the completion of CDB procurement modules, and evaluation of bids to engage a Data Management Consultant.Programmed activities for 2019/20 include: finalizing the alerting protocol, inclusive of warning dissemination and roles and responsibilities of key stakeholders by August 2019; and completing a communication strategy, baseline survey and public awareness campaign by September 2019.The project, which initially ran until November 2018, was extended to December 2019. It is envisaged that this will result from improved monitoring and predictions of critical bush fire outbreaks, and increased public awareness of these hazards. The project, which initially ran until November 2018, was extended to December 2019. Story Highlights
The Coalition of Better Parenting (CBP), through its various agencies and organisations, is working tirelessly to improve parenting practises in Jamaica. This is in recognition of the important role that parents play in the development of their children. Co-ordinator of the CBP, Doret Crawford, told JIS News that the umbrella body works through its network of some 40 agencies and organisations throughout the island, to carry out a number of activities and programmes focussed on parenting issues. She noted, for example, that “when Hope for Children, one of our members, has parenting projects in Greenwich Town, Rema (Wilton Gardens) or Jungle (Arnett Gardens), that is the coalition at work.” “When the Women’s Centre steps out and carries out parenting workshops for young fathers and mothers, or when 3-D goes into homes and sensitizes and encourages the parents of children with disabilities to seek help for their children…that is the coalition at work,” she stressed. The coalition, this month, is collaborating with the Ministry of Education in hosting a series of parenting workshops in observance of Parent Month. These workshops will be held in all six education region of the Ministry of Education. Two of the coalition members organising the sessions are the National Parent-Teacher Association of Jamaica (NPTAJ) and Parenting Partners Caribbean (PPC). The NPTAJ, established in 2006, brings together Parent Teacher Associations (PTAs) in schools across Jamaica, to speak in a collective manner to issues relating to parents. “We also see to what extent parents, as important stakeholders of the education system, can be involved in the transformation of the education process,” explained President of NPTAJ, Everton Hannam. He said the NPTAJ tries to make an impact on the education system in a meaningful way by working with the parents in the local PTAs. “We also sit on representative structures within the Ministry of Education to discuss or to make input into important areas such as the Text Book Committee and Human and Family Life Education Committee, of which other members of the parenting coalition form a significant part,” he informed. Also, from time to time, the association is asked to provide feedback from parents relating to issues of importance. The PPC, through its ‘Parents’ Place’, is also engaging parents and children in a meaningful way. Vice President of the group, Janet Brown, explained that the initiative began in 2010 when the Early Childhood Commission (ECC) contracted the PPC to develop a strategy for parents at the early childhood level. “They wanted a programmatic strategy. We engaged in consultations with children, with parents and other stakeholders, and what emerged was the concept that we call the ‘Parents’ Place,’ she explained. The Parents’ Place, she said, “is a familiar neighbourhood place, which welcomes and supports all parents and families to raise their children well. This is a universal kind of approach…it is more than a building”. The services offered are varied and flexible and can be attached or linked to a wide range of public and private services, such as health clinics, schools, libraries, social service agencies and churches. “In other words it builds on existing effort,” Mrs. Brown stated. Any community group, private or public organisation, non-government or faith-based organisation may apply to be designated a ‘Parents’ Place’. They may send applications to [email protected] Certain criteria must be met before an organisation can be designated a Parents’ Place.
zoom Owner and operator of liquefied natural gas carriers Golar LNG generated a net loss of USD 65.8 million in the first quarter of 2017, compared to an income of USD 8.6 million seen in the previous quarter.The company said that the improvements in shipping rates and activity levels during the final weeks of the fourth quarter of 2016 and into January translated into a modest improvement in first quarter operating revenues, which increased to USD 25.1 million from USD 23 million reported in the previous three-month period.Despite some improvement over the prior quarter, the shipping market remained weak in the first three months of 2017. Fleet Time Charter Equivalent (TCE) increased from 10,893 in the fourth quarter of 2016 to 14,189 in the first quarter of 2017.Golar LNG said that the improvement was partly driven by a number of vessels in the Cool Pool that secured short-term charters in the USD 30,000 per day range.However, this additional spot market activity together with reduced payments to Golar Partners in respect of the dry-docked Golar Grand “did not result in a reduction to reported voyage expenses.” Of the USD 16.9 million voyage expenses, USD 9.6 million represents the cost of chartering the Golar Grand from Golar Partners.Golar LNG said that the underlying trend remains positive as new liquefaction projects continue to deliver. Some 34 million tons of new LNG is expected to come on line in 2017, representing a 13% growth against 2016 global production.Against this, shipping capacity is expected to grow by around 9%, a mismatch which is expected to have a positive impact on shipping over the same time frame, Golar LNG informed.
APTN National NewsThere was a mixture of emotions in Calgary as the cast and crew gathered for a performance of the play “Making Treaty 7.”The theatre production is going ahead despite the deaths of two key players who died in a car crash earlier this year.APTN’s Chris Stewart [email protected]